Perfect 3.5" x 3.75" size for your pocket or apron
1/16" Scribe Holes in 1/16" increments up to 3"
QTY 5 - 1/4" Pin Holes for Marking Polygon Miters w/ included pin
Large enough to cross mark 2 x 4 lumber
The square features 1/16” increments laser etched up to 3” and can scribe with a mechanical pencil in the smaller holes every 1/16”. The larger 5 holes provide fixed angles for polygon miters for squares, hexagons and octagons. The foot is 1/4” thick and can be used to gauge heights and squareness of your table saw or router. Square is large enough to mark cross cuts on a standard 2x4 lumber.
For best results scribing, we recommend using the Pentel series of mechanical pencils because they have a 4mm (.157") long tip that supports the lead well inside the 1/16" diameter scribe holes. Models P205 (0.5mm lead) P207 (0.7mm lead) or P209 (0.9mm lead) are recommended.
